- Sep 26, 2017 -
⑴ Mesh Edge length must not be greater than 10cm, Bing, tether, rope diameter is not less than twice times the net rope, and should be greater than 7mm.
⑵ rope must be vertically and horizontally arranged, the adjacent two reinforcement rope spacing between 30 to 100cm, the net all rope forms the node must be firm, the reinforcement rope should extend the edge rope 1.2m, to facilitate the network with the net or the splicing between the net and the mold pole to lash. (or additional tying of rope).
⑶ old nets should not be damaged or other defects affecting the quality of use.